Skip to content
Coastline Prints

How much does 3D printing cost? Prices in Victoria, BC

Updated October 11, 2026

Short answer

At Coastline Prints in downtown Victoria, most small prints cost between $7.50 (the minimum order) and about $13.24. You pay a $7.50 order fee, 3¢ per gram of plastic, $1.00 per hour of printing, and $0.50 per piece.

3D printing cost per gram and per hour

  • Order fee, $7.50. Once per order, no matter how many parts are in it.
  • Filament, 3¢ per gram. The plastic itself. A golf ball weighs about 45 g, for scale. Specialty spools like wood fill cost a little more.
  • Printer time, $1.00 per hour. Power, wear and parts for the printer.
  • $0.50 per piece. For handling each printed part.

The minimum order is $7.50. If your parts add up to less, the total is topped up to the minimum.

3D printing cost calculator

You don't need a spreadsheet. The price slider on the home page prices any size of cube as you drag, and the order page works as a full 3D printing cost calculator for your own file: upload an STL or 3MF, change the size, material, quality and quantity, and the price updates live. Nothing is charged until you check out.

Example prices by size

These come from the same pricing as checkout, using today's rates, for one cube in PLA at standard quality and infill. Most real models cost less than a cube of the same height, because a cube fills its whole box.

PartFilamentPrint timeTotal
20 mm cube5 g21 min$8.50
30 mm cube12 g41 min$9.05
40 mm cube24 g1h 15m$9.96
50 mm cube42 g2h 04m$11.34
60 mm cube67 g3h 13m$13.24
80 mm cube144 g6h 41m$19.00

Is 3D printing expensive?

Not for small parts. Most of a small order is the order fee, and the plastic itself is cheap: a part the size of a golf ball uses about a dollar of filament. Big, solid or long prints cost more because they use hours of printer time.

Ordering more than one

The order fee is only charged once, so the price per part drops as you order more. One 30 mm cube costs $9.05. Ten of them cost $21.60, or $2.16 each.

How to make a print cheaper

  • Put everything in one order, so you pay the order fee once.
  • Scale the model down a little. Plastic use drops fast as size shrinks, because it goes with the volume.
  • Pick a lighter infill if the part doesn't need to be strong.
  • A small part on its own is mostly order fee. Add a second small part to the same order and it often costs only a dollar or two more.

Pickup or shipping

Pickup in downtown Victoria is free. Shipping anywhere in Canada is added at checkout, from $4.61 for a small flat print in a bubble mailer. All prices are in Canadian dollars.

Other guides