PLA vs PETG vs PLA-CF: strength, heat resistance and which to pick
Updated October 11, 2026
Short answer
Pick PLA for figures, gifts and anything for display. Pick PETG for parts that get used: clips, brackets, anything that sits in a hot car or needs to bend a little. Pick PLA-CF (carbon fibre PLA) for stiff, clean-looking parts like enclosures and mounts. All three cost the same per gram here.
PLA vs PETG vs PLA-CF compared
| PLA | PETG | PLA-CF | |
|---|---|---|---|
| Strength | Stiff but brittle, snaps when bent | Tough, bends before it breaks | Stiffest, still snaps if overloaded |
| Heat | Softens around 55 to 60 °C | Softens around 70 to 80 °C | Softens around 55 to 60 °C |
| Finish | Smooth, most colours, silk and matte options | Glossy, some see-through colours | Matte, hides layer lines well |
| Detail | Sharpest | Good | Good |
| Outdoors | Fine for a while, fades and softens in sun | Better in sun and rain | Like PLA |
| Colours in stock | 11 | 5 | 1 |
PLA
PLA is the standard 3D printing plastic. It holds fine detail, comes in the most colours, and is easy to sand and paint. Its weak spot is heat: a PLA part left on a car dashboard in summer can warp. Use it for figures, cosplay, tabletop terrain, planters and gifts.
PETG
PETG is the same family of plastic as water bottles. It's tougher than PLA, flexes a little instead of snapping, and handles more heat and sun. Use it for replacement parts, clips, hooks, outdoor pieces and anything that clicks together.
PLA-CF
PLA-CF is PLA with short carbon fibres mixed in. The fibres make it stiffer and give it a matte surface that hides layer lines, so parts look clean straight off the printer. It needs a hardened nozzle, so it's printed on our Elegoo Centauri Carbon. Use it for enclosures, mounts and brackets that should not flex.
PLA vs PETG strength
PLA is stiffer, so it feels more solid in your hand, but it snaps when bent too far. PETG gives a little and bends before it breaks, which makes it the stronger choice for clips, hinges and anything that takes a knock. Carbon fibre PLA is the stiffest of the three for parts that must not flex.
PLA vs PETG heat resistance
PLA starts to soften around 55 to 60 °C, which a car interior can reach on a sunny summer day. PETG holds its shape to around 70 to 80 °C. For anything in a car, near a heater or outside in the sun, pick PETG.
What about ABS?
ABS handles more heat than PETG, but it isn't one of our materials. For almost every everyday part, PETG does the job.
Still not sure?
Upload your file and switch between materials in the order screen. The price updates as you go, and you can see each colour on a sample print on the home page.



